JVC LT-Z32SX4B manual „ Connecting headphones, „ TV output from the OUT terminal

Additional preparation

„Connecting headphones

Connect the headphones with a stereo mini- jack (3.5 mm diameter) to the headphone jack.

•No sound comes from the TV speakers when the headphones are connected.

„TV output from the OUT terminal

The video/sound signal of a TV channel you are viewing is always output from the OUT terminal.

•No signal will output through the S VIDEO terminal when you are not viewing images coming from the S VIDEO input. In this case, use the VIDEO terminal instead of the S VIDEO terminal.

•Changing over a programme number (PR) also changes over the TV output from the OUT terminal.

•When using the VIDEO-1 COMPONENT Y Pb/Cb Pr/Cr terminal input, VIDEO-3 COMPONENT input or PC IN input, the sound signal is output from the OUT terminal but the picture signal is not output.

•Teletext programmes cannot be output.

„Connecting speakers/amplifier

While referring to the audio equipment connection diagram, connect the audio equipment you want to the TV.

You can use external front speakers to listen to the TV sound instead of the TV speakers.

Before connecting anything:

•Read the manuals provided with the amplifier and speakers.

•Turn the TV and amplifier off.

•To prevent magnetism from the speakers adversely effecting the TV screen, use magnetic-shielded speakers for the front speakers.

•Note that connecting cables are not supplied.

without terminal covers

L R

1Amplifier

2External speakers (Magnetic-shielded type)

•The output from the OUT terminal is not interrupted by headphone connection to the TV. You cannot cut the sound from the front speaker even if you connect a headphone to the TV.

•Adjust the volume of the external speakers with the amplifier.

ENGLISH

43