Product at a Glance
Use on Dimmer
Outdoor Use
Sound Activated
DMX
Master/Slave
Safety Notes
Auto Programs | |
| |
Replaceable Fuse | |
User Serviceable | |
Duty Cycle | |
Please read the following notes carefully before starting to work with this product. They include important safety information about its installation, usage, and maintenance.
∙Keep this User Manual for future consultation. If you sell this product to another user, be sure that they also receive this document.
∙Always make sure that the voltage of the outlet to which you are connecting this product is within the range stated on the decal or rear panel of the fixture.
∙This product is for indoor use only! To prevent risk of fire or shock, do not expose this fixture to rain or moisture.
∙Make sure there are no flammable materials close to the unit while operating.
∙Always install this product in a location with adequate ventilation, at least 20 in (50 cm) from adjacent surfaces.
∙Be sure that no ventilation slots on the unit’s housing are blocked.
∙Always disconnect this product from the power source before cleaning it or replacing fuse.
∙Make sure to replace the fuse with another of the same type and rating.
∙The maximum ambient temperature (Ta) is 104° F (40° C). Do not operate this product at higher temperatures.
∙In the event of a serious operating problem, stop using the unit immediately.
∙Never try to repair this product. Repairs carried out by unskilled people can lead to damage or malfunction. Please contact the nearest authorized technical assistance center.
∙Never connect this product to a dimmer pack.
∙Make sure the power cord is not crimped or damaged.
∙Never disconnect the power cord by pulling or tugging on the cord.
∙Never carry a fixture from the power cord or any moving part. Always use the hanging/mounting bracket or the handles.
∙Always avoid direct eye exposure to the light source when this fixture is on.
∙Do not touch the output nozzle on this product. It is very hot during operation and it may remain hot for several hours after turning the unit off.
∙Do not mount this product on a flammable surface (e.g., wood, linoleum, carton, plastic, or carpet).
∙Make sure there are no flammable materials close to the unit while operating.
∙Depending on the amount of fog/haze generated, all fog machines may set off smoke detectors.
FCQ (Fog Cleaner Quart) was specifically developed by Chauvet to clean your Arena™ Hazer 3. Make sure you use FCQ regularly to increase the life of your product.
Page 4 of 16 | Arena™ Hazer 3 User Manual (Rev. 02) |
