PHYSICAL FADER ASSIGNMENT (OPTIONAL SETUP)
Use this feature to combine or unify fixture control attributes for different fixtures. For example; if you were controlling 4 moving mirrors and 4 moving yokes, the color, gobo and dimmer channels may not line up ideally on the physical faders. Use this function to
fixtures using the same fader location.
Action
1)Press and hold PROGRAM & TAPSYNC buttons together (1) time to access the channel assignment mode.
2)Press a FIXTURE button that represents the fixture whose faders you would like to
3)Move the SPEED fader until you arrive at controller channel (number).
4)Move the FADE TIME fader to select the DMX channel.
5)Make all changes, and the press the MIDI/ADD button to confirm setting.
6)Repeat steps 3 ~ 5 as often as necessary.
If you wish to copy a scanner’s physical assignments to another scanner, continue by following steps
(2) times to exit mode.
Example: Copying Scanner 1 into Scanner 2
7)Press and hold FIXTURE button # 1.
8)While holding button # 1 press FIXTURE button # 2.
9)While holding FIXTURE buttons # 1 and # 2, press and hold MIDI/ADD button.
10)Release FIXTURE button # 1 first before releasing FIXTURE button # 2.
11)Release MIDI/ADD button.
12)All FIXTURE LED indicators will flash to confirm successful copy.
13)Press and hold PROGRAM & TAPSYNC buttons (2) times to exit mode.
Notes
All physical faders can be
Obey™ 40 User Manual | 9 | Revised: |