Chauvet DMX512 Midi Operation, Action, the third and fourth digits on the LED, display blink

Midi Operation

The controller will only respond to MIDI commands on the MIDI channel when it is set to full stop. All MIDI control is performed using Note on commands. All other MIDI instructions are ignored. To stop a chase, send the blackout on note.

Action

1) Press and hold the MIDI/ADD button until

	the third and fourth digits on the LED
	display blink.
	2) Select the MIDI control channel (1~16) via
	the BANK UP/DOWN buttons to set.
	3) Press and hold the MIDI/ADD button to
	store midi setup settings.
MIDI NOTE	FUNCTION (TURN ON/OFF)
00 to 07	Scenes 1~8 in BANK 1
08 to 15	Scenes 1~8 in BANK 2
16 to 23	Scenes 1~8 in BANK 3
24 to 31	Scenes 1~8 in BANK 4
32 to 39	Scenes 1~8 in BANK 5
40 to 47	Scenes 1~8 in BANK 6
48 to 55	Scenes 1~8 in BANK 7
56 to 63	Scenes 1~8 in BANK 8
64 to 71	Scenes 1~8 in BANK 9
72 to 79	Scenes 1~8 in BANK 10
80 to 87	Scenes 1~8 in BANK 11
88 to 95	Scenes 1~8 in BANK 12
96 to 103	Scenes 1~8 in BANK 13
104 to 111	Scenes 1~8 in BANK 14
112 to 119	Scenes 1~8 in BANK 15
120	Chase 1
121	Chase 2
122	Chase 3
123	Chase 4
124	Chase 5
125	Chase 6

126BLACKOUT

Notes

This is the Channel that the controller will receive MIDI note commands.

Obey™-40 User Manual 17 Revised: 2008-06-13 15:54:24