Safety Instructions
Please read these instructions carefully, which includes important information about the installation, usage and maintenance of this product.
xPlease keep this User Guide for future consultation. If you sell the unit to another user, be sure that they also receive this instruction booklet.
xAlways make sure that you are connecting to the proper voltage, and that the line voltage you are connecting to is not higher than that stated on the decal or rear panel of the fixture.
xThis product is intended for indoor use only!
xTo prevent risk of fire or shock, do not expose fixture to rain or moisture. Make sure there are no flammable materials close to the unit while operating.
xThe unit must be installed in a location with adequate ventilation, at least 20 inches (50cm) from adjacent surfaces. Be sure that no ventilation slots are blocked.
xAlways disconnect from power source before servicing or replacing lamp or fuse and be sure to replace with same lamp source.
xSecure fixture to fastening device using a safety chain. Never carry the fixture solely by its head. Use its carrying handles.
xMaximum ambient temperature (Ta) is 95°F (35°C). Do not operate fixture at temperatures higher than this.
xIn the event of a serious operating problem, stop using the unit immediately. Never try to repair the unit by yourself. Repairs carried out by unskilled people can lead to damage or malfunction. Please contact the nearest authorized technical assistance center. Always use the same type spare parts.
xDon’t connect the device to a dimmer pack.
xMake sure the power cord is never crimped or damaged.
xAvoid direct eye exposure to the lamp while it is on.
Caution! | There are no user serviceable parts inside the unit. Do not open the housing or |
| attempt any repairs yourself. In the unlikely event your unit may require service, |
| please contact CHAUVET at: |
SX Gobo Manual | 4 |
