Replacing Gobos
| 1) | Open the top cover by removing the |
|
| six screws indicated in figure A. |
| 2) | Remove the retaining spring using a |
|
| flathead screwdriver (figure B). |
| 3) | Remove the gobo and replace with a |
|
| new gobo. |
Note: | The black side of the gobo should be | |
| facing the lamp. | |
| 4) | Reinsert the retaining spring. |
Note: | The two springs indicated in figure C | |
| can be used to hold gel inserts or | |
| dichroic glass. This is optional, and is | |
| not included with the SX Gobo. | |
| 5) | Replace the top cover. |
Figure A
Figure B
Figure C
SX Gobo Manual | 8 |