Setup
-8- OVATION™ F-95WW User Manual Rev. 2
Mounting
Before mounting this product, read and follow the Safety Notes.
Orientation
Always mount this product in a safe position. The OVATION™ F-95WW may be
mounted in any position; however, make sur e there is adequate room for ventilation
,
configuration, and maintenance.
Rigging
CHAUVET® recommends using the following general guidelines when mounting this
product.
· When selecting an installation location, consider easy access to this pro duct for
operation, programming adjustments, and routine maintenance.
· Make sure to mount this product away from any flammable material as indic ated in
the Safety Notes.
· Never mount in places where rain, high humidity, extreme temperature chang es, or
restricted ventilation may affect the product.
· If hanging this product, make sure that the mounting location can support the
product’s weight. See the Technical Specifications for the weight-bearing
requirements of this product.
· When hanging this product, always secure to a fastening device using a s afety cable
(included).
Procedure
The OVATION™ F -95WW comes with a hangin g/mounting bracket to which you can
attach mounting clamps. The brack et has 13-mm holes
, which are appropriate for this
purpose. You must supply your own mounting clamps, so be
sure the clamps are
capable of supporting the weight of this product. Use at least one mounting point per
product where necessary.
Mounting Diagram
Floor Mounting
Overhead Mounting
Bracket
Adjustment
Hand Shank
Hanging/Mounting
Bracket
Mounting Clamp
(works with CLP-15 or
CLP-15N clamp from
CHAUVET®)
Safety Cable
(works with CH-05
cable from CHAUVET®)
Secure the safety
cable using the
passageway on
the side of the
product