
NOTE! Chauvet’s
Slave & 2 Light Show operation
1. Press the MENU button until the display .
2. Press the ENTER button to select Slave Mode. The selection is confirmed when
beginsto blink. You must make a selectionwithin 8seconds.
3.Press the UP and DOWN buttons to toggle between the 2slave modes.
4.Press the ENTER button to activate selection.
(Normal) Synchronized movement of the fixture.
(2 Light Show)Pan & tilt will be inverted on this fixture. All other programs will execute in sync.
NOTE! Slave mode can only be assignedwhen the fixture is presently connected to other fixtures.
Color presets
The Legend 250RX provides 2 color preset modes. This affects the way you call colors on the slider on a DMX controller.
1. Press the MENU button until the display .
2. Press the ENTER button to select Color Mode. Theselection is confirmedwhen
beginsto blink.Youmust make a selectionwithin 8seconds.
3.Press the UP and DOWN buttons to toggle between the 2 Color Modes, Normal andSplit Colors
.
4.Press the ENTER button to activate selection.
Normal color mode provides indexed color presets. Only solid colors will appear as you move the channel fader on a controller.
Split color mode provides indexed solid and split color presets. Both will appear as you move the channel fader on a controller.
NOTE! A color scrolling preset exists in both modes. This is when the color wheel begins to rotate continuously and you canselect the rate of speed, for a rainbow color like affect.
Pan invert
1. Press the MENU button until the display .
2. Press the ENTER button to selectPanInvert. The selection is confirmed when beginsto blink.Youmust make a selectionwithin 8seconds.
3.Press the UP and DOWN buttons to toggle between Normal and
Inverted.
4.Press the ENTER button to activate selection.
Normal pan movement
Pan movement inverted
11 |