Fixture life counter

1. Press the MENU button until the display reads-.

2. Press the ENTER button and the display will read the number of hours the fixture has been in operation.

3.Press the MENU button to return to the mainmenu or leave for 5seconds and fixturewill return to the normal display.

Fixture reset

Control Panel Reset

1. Press the MENU button until the display reads-.

2. Press the ENTER button to reset the fixture. All motors andmechanical partswill return to the initial power-up positions.

DMX Reset

Fixture Channel Level

8255

16 240 Figure 3.10-1

1.On your DMX controller device setthe following DMX level outputsshown in “Figure 3.10-1”

2.The fixturewill resetwhen both of the fixture channels shown in “Figure3.10-1” receive thespecified levels.

CA-8 Easy Controller (Optional)

The easy remote controller is used only in master/slave mode. By connecting the 1/4” microphone jack to the first unit, you will find that the remote control on the first unit will control all the other units for Stand by, Strobe/Next/Strobe and Show 1/Slow/Show 2 functions.

Buttons

STAND BY

FUNCTION or

STROBE/NEXT

Function

Will blackout all units connected

In Show 1 Tap: Steps through color and gobo presets

Hold: Will strobe in white

In Slow Tap: Every 10 taps steps through each color and the 11th tap changes the gobo. Repeat as necessary to achieve desired result.

In Show 2 Tap: Steps through color and gobo presets

Hold: Will strobe in white

FAST/SLOW

LED Status

Mode

 

 

Off

Show 1

(210° Tilt)

 

On

Slow Show 1 (Slow motion)

 

Blinking

Show 2

(90° Tilt)

NOTE! All movement and changes are sound activated except when in SLOW Show 1 mode. In SLOW mode, color and gobo change is user selectable using the “CA-8 Easy Controller”.

DMX-1655 Manual Version 1.11

13