Chauvet Legend 412Z Floor Mounting, Overhead Mounting, Orientation Rigging Procedure, Setup

Setup

Mounting

Orientation

Rigging

Procedure

Mounting Diagram

Before mounting this product, read and follow the Safety Notes. For our CHAUVET® line of mounting clamps, go to http://trusst.com/productcategory/base-plates-accessories-clamps/.

Always mount this product in a safe position and make sure there is adequate room for ventilation, configuration, and maintenance.

CHAUVET® recommends using the following general guidelines when mounting this product.

∙When selecting an installation location, consider easy access to this product for operation, programming adjustments, and routine maintenance.

∙Make sure to mount this product away from any flammable material as indicated in the Safety Notes.

∙Never mount in places where rain, high humidity, extreme temperature changes, or restricted ventilation may affect the product.

∙If hanging this product, make sure that the mounting location can support the product’s weight. See the Technical Specifications for the weight-bearing requirements of this product.

∙When hanging this product, always secure to a fastening device using a safety cable (such as CH-05from CHAUVET®).

The Legend™ 412Z comes with a double-yoke bracket to which you can either attach mounting clamps for hanging or simply use as a floor stand. You must supply your own mounting clamps. Make sure the clamps (such as CLP-15from CHAUVET®) are capable of supporting the weight of this product. Use at least one mounting point per product.

Mounting Clamps

Safety Cable

Omega Brackets

Floor Mounting Overhead Mounting

When using only one mounting clamp with this fixture, you must use a clamp with a captive bolt to prevent accidental loosening.

Legend™ 412Z User Manual Rev. 1 -7-