Chauvet Legend 412Z Setup, AC Power, Power Linking DMX Linking, AC Plug, Fuse Replacement

Setup

3.SETUP

AC Power

AC Plug

Each Legend™ 412Z has an auto-ranging power supply that works with an input voltage range of 100 to 240 VAC, 50/60 Hz. To determine the power requirements for each Legend™ 412Z, refer to the label affixed to the product. You can also refer to the Technical Specifications chart in this manual.

The listed current rating indicates the maximum current draw during normal operation. For more information, you may download Sizing Circuit Breakers from the CHAUVET® website: www.chauvetlighting.com/download/pro.

Always connect this product to a protected circuit with an appropriate electrical ground to avoid the risk of electrocution or fire.

Never connect this product to a rheostat (variable resistor) or dimmer circuit, even if the rheostat or dimmer channel serves only as a 0 to 100% switch.

The Legend™ 412Z comes with a Neutrik® powerCON A connector on one end and an Edison plug on the other end (US market). If the power cord adapter that came with your product has no plug or you need to change the Edison plug, use the table below to wire the new plug..

Fuse

Replacement

Power Linking

DMX Linking

DMX Modes

Connection	Wire (U.S.)	Wire (Europe)	Screw Color
AC Live	Black	Brown	Yellow or Brass
AC Neutral	White	Blue	Silver
AC Ground	Green/Yellow	Green/Yellow	Green

1.Disconnect this product from the power outlet.

2.Using a Phillips #2 head screwdriver, unscrew the fuse holder cap from the housing.

3.Remove the blown fuse and replace with another fuse of the same type and rating (T 6.3 A, 250 V).

4.Screw the fuse holder cap back in place and reconnect power.

Make sure to disconnect the product’s power cord before replacing a blown fuse. Always replace the blown fuse with another of the same type and rating.

The Legend™ 412Z supports power linking. You can power link up to 9 products at 120 V; up to 15 at 208 V; or up to 17 at 230 V.

This product comes with a power input cord. Power linking cables are available from CHAUVET® for purchase.

You can link the Legend™ 412Z to a DMX controller using a standard DMX serial connection. If using other DMX compatible products with the Legend™ 412Z, you can control each individually with a single DMX controller.

The Legend™ 412Z uses the standard DMX data connection for the 15-, 27-, 31-, and 34-channel DMX modes.

∙Refer to the Introduction chapter for a brief description of these modes.

∙Refer to the Operation chapter to learn how to configure the Legend™ 412Z to work in these modes.

∙The DMX Values section provides you with detailed information regarding the DMX modes.

-6- Legend™ 412Z User Manual Rev. 1