Precor C932 owner manual Setup Mode and Prompts, To continue in Setup mode, press Select

C O M M E R C I A L P R O D U C T S D I V I S I O N

The SmartRate® and Heart Rate system is standard equipment. The heart rate receiver is factory-installed in the display console.To actively view the SmartRate® and heart rate displays, a user must wear a POLAR® chest strap, face the dis- play console, enter his or her age (during the Setup prompts), and begin a course. The user’s heart rate is transmitted from the chest strap to the receiver inside the console and appears on the display. A blinking segment approximates the user’s heart rate and shows which zone the heart rate is in: weight loss or cardiovascular.

Important: During a course, a user’s heart rate must be above 40 beats per minute before the segment begins to blink. Note that pressing QuickStart at the PRECOR banner causes the SmartRate® display feature to be inactive.

SETUP MODE AND PROMPTS

The PRECOR banner is the “starting point” when a user begins a workout. If the banner does not scroll across the display, press the RESET key. If the display appears blank, make sure that the treadmill is turned ON. Press the ON/OFF [I/O] switch located at the front, near the power receptacle, to ON.

PRECOR banner: From the PRECOR banner, a user presses the SELECT key to access the Setup mode which lets a user determine the course, workout time, weight, and age parameters as described below.

Note: Key presses to the INCLINE ▼▲ or SPEED ▼▲ keys are ignored when the banner is being displayed. Refer to page 30 for more information about the keypad.

MANL: The course prompt, MANL, indicates that the C932 is ready to accept course entries. To help a user determine which course they want to use, the course names and profiles appear on the display console label. The ▼ and ▲ keys let a user scroll through the available courses. The display presents the abbreviated name of the course. To choose the selection being displayed and continue in Setup mode, press SELECT. (Refer to The Setup Mode and the QuickStart Feature on page 28.)

Note: Depending on the course that is selected, a user may be prompted for other information. Refer to C932 Courses on page 40.

XXMIN: Acceptable entries at the workout time prompt range between NOLIM (zero) and 99 minutes. Use the ▼ and ▲ keys to change the selection. If the club allows it and a user wants to work out indefinitely, they can choose NOLIM. A cool-down period will not be appended to the course. Note that the Weight Loss course has a preset time limit so a user will not be prompted for a workout time when they choose WTLS. A user cannot workout indefinitely in the Weight Loss course.

To continue in Setup mode, press SELECT.

Important:The club has the option to set limits on course duration and cool down and pause time. Refer to Club Information on page 20.

page 27