C O M M E R C I A L P R O D U C T S D I V I S I O N
Diagram 18 | QUICKSTARTTM: When pressed at the Precor banner, |
C932 keypad. | the running belt begins moving after a three second |
| delay. SmartRate® is inactive and default values apply. |
Keypad keys
The keys on the keypad let you:
• control your workout session,
• answer prompts prior to starting a course,
• determine which display features appear,
• prematurely end a course, and
• adjust the incline and speed levels.
KEYS ON THE KEYPAD
The following information explains the different uses of the keys from left to right. To locate each key, look at the display console or refer to Diagram 18.
INCLINE ▲▼: During a workout, the INCLINE ▲▼ keys let you increase or decrease the incline in 0.5% increments.The display can show a range from 0 to 15%. Setting 0 is level (and the lowest) incline.
When a user changes the incline by pressing the INCLINE ▲ or ▼ key, the num- ber that appears on the display shows the target incline (not necessarily, the present incline) because the display can change much faster than the treadmill’s lift.
Note: Any time during a workout, a user can view the actual incline by lightly touching either INCLINE ▲ or ▼ key. A user can opt to change the incline, if they hold the key down for more than one second.
During Setup mode, the INCLINE ▲▼ keys are used for data selection. Pressing either ▲ or ▼ key does not affect the incline. However the ▲ or ▼ keys do affect what appears on the display. Refer to Setup Mode and Prompts on page 27.
RESET: Provides access to diagnostics (see Club Information on page 20) and lets the user access the Workout Summary display while in Pause mode.Refer to Pause, Workout Summary, and Exit Features on page 39. Note that if the user presses RE- SET during the Setup mode, the use exits Setup mode and the PRECOR banner returns.
QUICKSTART: This key lets a user bypass the Setup prompts and start their workout immediately using the Manual (MANL) course. The QuickStart key can be pressed any time during the Setup prompts. For more information, refer to page 28, The Setup Mode and the QuickStart Feature.
page 32
