C O M M E R C I A L P R O D U C T S D I V I S I O N

The C932 Keypad

The C932 keypad allows a user to control the workout session. Information that you will find in this section includes:

Tips on using the display keypad

Descriptions of each key on the keypad

How to use the SELECT key to change which features appear on the display

KEYPAD TIPS

Review the following tips and make sure that your customer’s know how to use the keypad.

Accurate entries are required or features such as SmartRate® will not work properly.

During the Setup prompts, a user can change the information being dis- played by pressing any or key. (Incline and speed levels are not af- fected until the course begins.)

Press SELECT to “select” the information being displayed.

Pressing QuickStart at the PRECOR banner bypasses further selections and displays the Manual (MANL) course. Default values apply. The SmartRate® display will not appear. Refer to The Setup Mode and the QuickStartTM Feature on page 28.

Anytime during the setup or workout, press RESET to return to the PRECOR banner.

A time-out occurs during the Setup prompts if the C932 detects no key presses for two minutes. The display returns to the PRECOR banner.

SPECIAL KEYPAD FUNCTIONS AT THE PRECOR BANNER

A variety of tasks can be performed from the banner using different key presses:

Note: Key presses to the or key are ignored when the banner is being displayed.

RESET — initiates the diagnostic mode. Refer to Club Information on page 20.

QUICKSTARTTM — causes the system to start the Manual (MANL) course. Default settings apply. Refer to The Setup Mode and the QuickStart Feature on page 28.

SELECT — initiates the Setup mode and causes the course prompt to appear.

page 31

Page 31
Image 31
Precor owner manual C932 Keypad, Keypad Tips, Special Keypad Functions AT the Precor Banner