C O M M E R C I A L P R O D U C T S D I V I S I O N

Press SELECT once again and the Error Log appears. The most recent error log appears first and scrolls across the display. If the words, NO ERRORS appear, no errors have been recorded.

Up to ten error codes can be recorded and viewed in the following format.

 

The number of hours that the treadmill has been

Most recent error

in use when the error occurred

1: ER33 AT

12,345,678 MILES 1,714 HOURS

Error code

Odometer reading at the time the error occurred

Note: To clear (delete) the error log, press the QuickStart key for at least four seconds while the message HOLD QUICKSTART TO CLEAR ERROR LOG scrolls across the display. If the QuickStart key is released before the message finishes scrolling, then the display returns to the previous error code. If you continue to press the QuickStart key until the message finishes scrolling, then prompts appear on the display and let you know when the error messages have been deleted from memory.

Important: You cannot retrieve the error log once you have deleted it.

To return to the PRECOR banner, press RESET, SELECT, or the red Stop button.

page 25

Page 25
Image 25
Precor C932 owner manual ER33 AT 12,345,678 Miles 1,714 Hours