C O M M E R C I A L P R O D U C T S D I V I S I O N
When a user presses QuickStart at the PRECOR banner, the default values shown below apply.
QUICKSTART Default Values
Setup Prompts | Default Value |
Course | Manual (MANL) |
Workout time | Club limit |
Weight | 150 lbs. (68 kg.) |
AGE 0 : | A valid AGE must be entered to use the SmartRate® dis- |
| play. If QuickStart is pressed after an age is entered, then |
| the SmartRate display will appear when a user wears the |
| POLAR® chest strap. If no “Age” entry occurs, then |
| SmartRate LED’s light but are not activated. Note that the |
| POLAR® chest strap is available through your Precor dealer. |
| Refer to Obtaining Service on page 7. |
SELECT key: While the PRECOR banner is displayed, the SELECT key accesses the Setup mode. Refer to Setup Mode and Prompts on page 27. During a course, the SELECT key changes what features appear on the display. To learn about which features appear on the display or setting up an automatic scan of the work- out data, refer to Changing the Display Features Using the SELECT Key.
SPEED ▼▲: During a workout, the SPEED keys let a user decease or increase the running belt’s speed. The display can show a range from 0.5 to 11.0 miles per hour (1.0 to 18.0 kilometers per hour) and changes can be made in 0.1 increments.
When a user changes the speed by pressing the SPEED ▲ or ▼ key, the num- ber that appears on the display shows the target speed (not necessarily, the present speed of the running belt) because the changes to the display can occur much faster than the belt speed.
Any time during a workout, a user can view the actual speed by lightly tapping either SPEED ▲ or ▼ key.The “pace” (minutes per mile) appears in the
During Setup mode, the SPEED ▲ ▼ keys are used for data selection. Pressing either ▼ or ▲ key does not affect the running belt. However the ▲ or ▼ keys do affect what appears on the display. Refer to Setup Mode and Prompts on page 27.
Stop button: The red Stop button is not part of the keypad, but it is an integral part of the display console. Anytime during a workout, a firm tap on the red Stop button slows the running belt to a stop. The treadmill retains a user’s workout statistics and enters Pause mode. The club has the ability to limit the amount of time a user can remain in pause mode. Refer to Club Information on page 20.
For a user to resume working out within the time frame allotted, he or she can press the SPEED ▲ until the desired speed of the running belt is reached.
page 33
