Figure 1 - AC Voltage Switch

1.BEFORE YOU BEGIN

What is included

Ø1 x LX10™

ØPower Cord

ØWarranty Card

ØUser Manual

Unpacking Instructions

Immediately upon receiving a fixture, carefully unpack the carton, check the contents to ensure that all parts are present, and have been received in good condition. Notify the shipper immediately and retain packing material for inspection if any parts appear damaged from shipping or the carton itself shows signs of mishandling. Save the carton and all packing materials. In the event that a fixture must be returned to the factory, it is important that the fixture be returned in the original factory box and packing.

AC Power

To determine the power requirements for a particular fixture, see the label affixed to the back plate of the fixture or refer to the fixture’s specifications chart. A fixture’s listed current rating is its average current draw under normal conditions. All fixtures must be powered directly off a switched circuit and cannot be run off a rheostat (variable resistor) or dimmer circuit, even if the rheostat or dimmer channel is used solely for a 0% to 100% switch. Before applying power to a

fixture, check that the source voltage matches the fixture’s requirement. Check the fixture or device carefully to make sure that if a voltage selection switch exists that it is set to the correct line voltage you will use.

Warning!

Verify that the voltage select switch on your unit matches the

 

 

line voltage applied. Damage to your fixture may result if the

 

 

line voltage applied does not match the voltage indicated on

Not all fixtures have a voltage

 

the voltage selector switch. All fixtures must be connected to

select switch. Please be sure to

 

connect to the proper voltage.

 

circuits with a suitable Earth Ground.

 

 

Contact Us

 

 

 

 

 

World Wide

 

 

 

 

General Information

Chauvet Lighting

 

 

 

5200 NW 108th Avenue

 

 

 

Sunrise, FL 33351

 

 

 

voice:

954.929.1115

 

 

 

fax:

954.929.5560

 

 

 

toll free: 800.762.1084

 

 

Technical Support

Chauvet Lighting

 

 

 

5200 NW 108th Avenue

 

 

 

Sunrise, FL 33351

 

 

 

voice:

954.929.1115 (Press 4)

 

 

 

fax:

954.929.5560 (Attention: Service)

 

 

World Wide Web

www.chauvetlighting.com

 

LX10

3

2/7/2012 10:22 AM

Page 3
Image 3
Chauvet LX10 user manual Before YOU Begin, What is included, Unpacking Instructions, AC Power, Contact Us

LX10 specifications

The Chauvet LX10 is a notable addition to the world of stage lighting, designed to cater to a range of applications from small gigs to larger events. Known for its versatility and robust performance, the LX10 series sets a standard in the entertainment industry, making it a popular choice among lighting professionals and enthusiasts alike.

One of the LX10’s main features is its powerful LED illumination. The fixture incorporates a mix of advanced LED technology, providing bright and vibrant colors while maintaining energy efficiency. The LX10 utilizes a combination of red, green, blue, and white LEDs, enabling a wide color spectrum that can be easily customized to suit different atmospheres. This capability is particularly beneficial for dynamic performances, where mood lighting is essential.

Another characteristic that sets the LX10 apart is its user-friendly interface. The fixture comes equipped with a digital display that allows for straightforward navigation of its various settings. This intuitive design enables quick adjustments, making it accessible to users with varying levels of expertise. Additionally, the LX10 supports DMX control, providing the flexibility to integrate with other lighting fixtures and controllers, ensuring seamless operation during live performances.

The LX10 also boasts a variety of built-in effects, including strobe functionality and color macros, enhancing the visual experience for audiences. These effects can be easily activated and customized, allowing for creative expression that elevates any performance. Furthermore, the fixture features adjustable beam angles, enabling users to modify the focus and spread of light according to their requirements.

Durability is another key aspect of the LX10, as it is designed to withstand the rigors of touring and frequent use. Constructed with high-quality materials, this lighting fixture offers long-lasting performance. Its lightweight design also promotes easy transport and setup, making it an ideal choice for mobile DJs, bands, and event organizers.

In conclusion, the Chauvet LX10 is a versatile and powerful lighting fixture that offers an array of features suitable for both professional and casual applications. Its advanced LED technology, user-friendly controls, built-in effects, and robust construction make it a favorite in the lighting industry, paving the way for creativity and dynamic performances. Whether for a small venue or a large-scale event, the LX10 delivers impressive results, ensuring that every show is memorable.