3.SETUP
Disconnect the power cord before replacing a fuse and always replace with the same type fuse.
Fuse Replacement
With a flat head screwdriver wedge the fuse holder out of its housing. Remove the damaged fuse from its holder and replace with exact same type fuse. Insert the fuse holder back in its place and reconnect power.
The fuse is located inside this compartment. Remove using a flat head screwdriver.
Mounting
ORIENTATION
This fixture may be mounted in any position provided there is adequate room for ventilation.
RIGGING
Hanging Clamp
It is important never to obstruct the fan or vents pathway. Mount the fixture using, a suitable “C” or “O” type clamp. Adjust the angle of the fixture by loosening both knobs and tilting the fixture. After finding the desired position, retighten both knobs.
·When selecting installation location, take into consideration lamp replacement access and routine maintenance.
·Safety cables must always be used.
·Never mount in places where the fixture will be exposed to rain, high humidity, extreme temperature changes or restricted ventilation.
Note!
Clamp is sold separately.
LX10 | 6 | 2/7/2012 10:22 AM |
