5.TECHNICAL INFORMATION
Fixture Maintenance
Dust build up reduces light output performance and can cause overheating. This can lead to reduction of the light source’s life and mechanical wear. To maintain optimum performance and minimize wear, you should clean your lighting fixtures at least twice a month. However, be aware that usage and environmental conditions could be contributing factors to increase the cleaning frequency.
To clean this lighting fixture, follow the instructions below:
•Unplug the fixture from power.
•Wait until the fixture is cold.
•Use a vacuum (or dry compressed air) and a soft brush to remove dust collected on the external surface and fan vents.
•Clean the glass panel (laser aperture) with a mild solution of glass cleaner or isopropyl alcohol.
•Apply the solution directly to a soft,
•Gently polish the glass surface until it is free of haze and lint.
Always dry the glass surface carefully after cleaning them.
•Refrain from spinning the fan using compressed air because you could damage it.
•DO NOT open this fixture for cleaning or servicing.
Scorpion™ GVC/RVM/RGY User Manual (Rev. 02k) | Page 21 of 26 |
