Chauvet TRI-18 Orientation, Rigging, Mounting Diagram, Overhead Mount Floor Mount, Yoke

Mounting	Before mounting the product, read and follow the safety recommendations indicated in
	the Safety Notes.
Orientation	The SlimBANK™ TRI-18 may be mounted in any position; however, make sure
	adequate ventilation is provided around the product.
Rigging	∙ Before deciding on a location, always make sure there is easy access to the product
	for maintenance and programming.
	∙ Make sure that the structure or surface onto which you are mounting the product
	can support the product’s weight (see the Technical Specifications).
	∙ When mounting the product overhead, always use a safety cable. Mount the
	product securely to a rigging point, such as an elevated platform or a truss.
	∙ When rigging the product onto a truss, you should use a mounting clamp of
	appropriate weight capacity. The bracket has a 13-mm holes, which are appropriate
	for this purpose.
	∙ When power linking multiple products, you must always consider the length of the
	power linking cable and mount the products close enough for the cable to reach.
	∙ The bracket adjustment knobs allow for directional adjustment when aiming the
	product to the desired angle. Only loosen or tighten the bracket knobs manually.
	Using tools could damage the knobs.
	∙ The double-bracketed yoke also serves as floor supports. When mounting the
	product on the floor, make sure that the product and cables are away from people
	and vehicles.

Mounting Diagram	Double-Bracketed	Mounting Clamps
	Yoke

Safety Cable

Bracket

Adjustment

Knobs

Overhead Mount

Floor Mount

SlimBANK™ TRI-18 User Manual Page 9 of 19