Static Colors
Custom Color Mixing
Selecting the Dimmer Mode
Temperature Display
To select a preset static color, do the following:
1.Press <MENU> repeatedly until
2.Press <ENTER> and r (red), g (green), b (blue), gb (cyan), r b (magenta), rg (yellow), or rgb (white) shows on the display.
3.Use <UP> or <DOWN> to select the desired preset color.
4.Press <ENTER>.
To custom mix a color, follow the instructions below:
1.Press <MENU> repeatedly until
2.Press <ENTER> and one of the following colors shows on the display: rXXX (red), gXXX (green), or bXXX (blue).
3.Press <ENTER> repeatedly to select the desired color.
4.Use <UP> or <DOWN> to select the desired color value
5.Press <ENTER> to set the color value and continue to the next color.
6.Repeat steps 3 to 5 until you create your desired color.
To select the dimmer mode, do the following:
1.Press <MENU> repeatedly until dIM shows on the display.
2.Press <ENTER> and one of the following shows on the display:
∙OFF (dimmer speed off)
∙dIM1 (dimmer mode 1, fast speed)
∙dIM2 (dimmer mode 2, middle speed)
∙dIM3 (dimmer mode 3, slow speed)
3.Use <UP> or <DOWN> to select the desired dimmer mode.
4.Press <ENTER>.
To view the temperature of the LEDs, follow the instructions below:
1.Press <MENU> repeatedly until tEMP shows on the display.
2.Press <ENTER> and the temperature will be shown in degrees Celsius.
SlimBANK™ | Page 15 of 19 |
