Chauvet TRI-18 user manual Configuration Standalone

Configuration

(Standalone)

Sound-Active Mode

Sound Sensitivity

Auto Program

Program Speed

Set the product in one of the standalone modes to control without a DMX controller.

∙Connect the product to a suitable power outlet.

Never connect a product that is operating in any standalone mode (Static, Auto, or Sound-Active) to a DMX string connected to a DMX controller. Products in standalone mode may transmit DMX signals that could interfere with the DMX signals from the controller.

To enable the Sound-Active mode, do the following:

1.Press <MENU> repeatedly until Snd shows on the display.

2.Press <ENTER>.

To set the sound sensitivity, follow the instructions below:

1.Press <MENU> repeatedly until SenS shows on the display.

2.Use <UP> or <DOWN> to select the desired sound sensitivity (u 0–u100).

3.Press <ENTER>.

The product will only respond to low frequencies of music (bass and drums).

To select an auto program, do the following:

1.Press <MENU> repeatedly until P--shows on the display.

2.Press <ENTER> and P 1–P 14 shows on the display.

3.Use <UP> or <DOWN> to select the desired auto program.

4.Press <ENTER>.

To set the auto program speed, follow the instructions below:

1.Press <MENU> repeatedly until S--shows on the display.

2.Use <UP> or <DOWN> to select the desired auto program speed S 1–S100(slow to fast).

3.Press <ENTER>.

Page 14 of 19 SlimBANK™ TRI-18 User Manual