Orientation
This fixture may be mounted on the included tripod stand, in any location, provided there is adequate room for ventilation.
Rigging
There are two methods of mounting this fixture.
Using the included tripod stand
Using a clamp on the two clamp hanging bolts
Adjust the angle of the each of the four lights on the fixture by loosening both knobs and tilting the fixture. After finding the desired position, retighten both knobs.
oWhen selecting installation location, take into consideration access and routine maintenance.
oNever mount in places where the fixture will be exposed to rain, high humidity, extreme temperature changes or restricted ventilation.
oThe clamps for hanging are sold separately.
oWhen using the clamp hanging bolts, BOTH of the two hanging positions MUST be used.
Clamp hanging bolts
(2) two total
Light pan angle adjustment knob
Light tilt angle adjustment knob
Both clamps MUST be USED when
5. Appendix | 8 | 5/7/2010 1:21 PM |
