10.Maintain tools with care. Keep tools sharp and clean for better and safer performance. Follow instruc- tions for lubricating and changing accessories. Inspect tool cords peri- odically and, if damaged, have them repaired by an authorized technician. The handles must be kept clean, dry, and free from oil and grease at all times.
11.Disconnect power. Unplug trans- former when not in use.
12.Avoid unintentional starting. Be sure the switch is in the Off position when not in use and before plugging in. Do not carry any tool with your finger on the trigger, whether it is plugged in or not.
13.Stay alert. Watch what you are do- ing, use common sense. Do not oper- ate any tool when you are tired.
14.Check for damaged parts. Before using any tool, any part that ap- pears damaged should be carefully checked to determine that it will oper- ate properly and perform its intended function. Check for alignment and binding of moving parts; any broken parts or mounting fixtures; and any other condition that may affect proper operation. Any part that is damaged should be properly repaired or re- placed by a qualified technician. Do not use the tool if any switch does not turn On and Off properly.
15.Guard against electric shock. Prevent body contact with grounded surfaces such as pipes, radiators, ranges, and refrigerator enclosures. Never touch the object being coated with one hand while spraying with the other.
16.Replacement parts and acces- sories. When servicing, use only identical replacement parts. Use of any other parts will void the warranty. Only use accessories intended for use with this tool. Approved accesso- ries are available from Harbor Freight Tools.
17.Do not operate tool if under the in- fluence of alcohol or drugs. Read warning labels on prescriptions to determine if your judgment or reflex- es are impaired while taking drugs. If there is any doubt, do not operate the tool.
18.Use proper size and type extension cord. If an extension cord is required, it must be of the proper size and type to supply the correct current to the tool without heating up. Otherwise, the extension cord could melt and catch fire, or cause electrical damage to the tool. This tool requires use of an extension cord of 0 to 10 amps capability (up to 50 feet), with wire size rated at 18 AWG. Longer exten- sion cords require larger size wire. If you are using the tool outdoors, use an extension cord rated for outdoor use (signified by “WA” on the jacket).
19.Maintenance. For your safety, service and maintenance should be performed regularly by a qualified technician.
20.The warnings, cautions, and instruc- tions discussed in this instruction manual cannot cover all possible con- ditions and situations that may occur. It must be understood by the operator that common sense and caution are factors which cannot be built into this
SKU 42802 | For technical questions, please call | Page 3 |
