Read the entire Important Safety Information section at the beginning of this manual including all text under subheadings therein before set up or use of this product.
To prevent serious injury:
Operation of this equipment may create sparks that can start fires around dry vegetation.
A spark arrestor may be required.
The operator should contact local fire agencies for laws or regulations relating to fire prevention requirements.
Figure 1
Pull (Recoil)
Starter Engine (on/off) Switch
Handle (4)
A
B
C
D
3
Operating Instructions
Read the entire Important Safety Information section at the beginning of this manual including all text under subheadings therein before set up or use of this product.
To prevent serious injury from accidental starting: Turn the Power Switch of the equipment to its “OFF” position, disconnect the spark plug wire(s) before assembling or making any adjustments to the equipment.
Engine Controls
1.Engine Switch, disables engine in “OFF” position.
AC 120 V Outlets | DC Outlet |
Economy (on/off) Switch
2.Economy Control Switch decreases output of Generator when less power is needed. This will result in better fuel efficiency and lower noise vol- ume.
3.Overload Light (A) comes on when the Inverter Control Unit overheats, or the AC output rises above 7.9 AMPS. The electronic breaker will then ac- tivate, stopping power generation in order to protect both the Generator and any connected devices. The AC
Pilot Light (B) (green) will go off and the Overload Light (C) (red) will stay on. The Generator Engine will stop running. When this happens, pro- ceed as follows:
SKU 65588 | For technical questions, please call | Page 7 |
