Chicago Electric 66603 manual Figure F

3.To add engine oil, unscrew and remove the Oil Dipstick (65A). Pour engine oil into the oil fill hole until the level of oil is even with the bottom edge of the oil fill hole (if you cannot see the oil through the oil fill hole, then the oil is too low and more oil must be added). Then, make sure to screw the Oil Dipstick back into its Dipstick Hole. (See Figure D.)

THIS GENERATOR HAS AN AUTO-SHUTDOWN OIL SENSOR. IF ENGINE STOPS OR WILL NOT START, CHECK OIL LEVEL.

4.To fill the Fuel Tank (31), unscrew and remove the Fuel Tank Cap (34). Fill the

Fuel Tank with mid-to-high octane unleaded gasoline. Then replace the Fuel

Tank Cap. When necessary, refill the Fuel Tank. (See Figure E.)

5.Periodically, check the Fuel Filter (32) for excessive dirt and debris. If necessary, remove the Fuel Filter and clean with compressed air. (See Figure E.)

FUEL VALVE (41) CHOKE LEVER (21A)

FIGURE F

SKU 66603 For technical questions, please call 1-800-444-3353. Page 13