SKU 66891 For technical questions, please call 1-800-444-3353. Page 4
Unmodied plugs and matching out-
lets will reduce risk of electric shock.
NOTE: This Compact Belt Sander has a
2-Prong Power Cord plug.
Avoid body contact with grounded b.
surfaces such as pipes, radiators,
ranges and refrigerators. There is
an increased risk of electric shock if
your body is grounded.
Do not expose power tools to rain c.
or wet conditions. Water entering
this Compact Belt Sander will in-
crease the risk of electric shock.
Do not abuse the cord. Never d.
use the cord for carrying, pulling
or unplugging this Compact Belt
Sander. Keep the cord away from
heat, oil, sharp edges or moving
parts. Damaged or entangled cords
increase the risk of electric shock.
When operating this Compact Belt e.
Sander outdoors, use an extension
cord suitable for outdoor use. Use
of a cord suitable for outdoor use
reduces the risk of electric shock.
If operating this Compact Belt f.
Sander in a damp location is un-
avoidable, use a Ground Fault
Circuit Interrupter (GFCI) protected
supply. Use of a GFCI reduces the
risk of electric shock.
Specic Personal safety Rules:3.
Stay alert, watch what you are do-a.
ing and use common sense when
operating this Compact Belt Sand-
er. Do not use while you are tired
or under the inuence of drugs,
alcohol or medication. A moment
of inattention while operating power
tools may result in serious personal
injury.
Use personal protective equip-b.
ment. Always wear ANSI-approved
safety eye protection and a dust-
mask/respirator. Safety equipment
such as non-skid safety shoes, a
hard hat, or hearing protection used
for appropriate conditions will reduce
personal injuries.
Do not allow children to use this c.
Compact Belt Sander. This power
tool is not a toy and should not be
operated by any child, or untrained
user, at any time.
Severe abrasion hazard. d. Keep
hands and ngers clear of moving
sanding belts, and do not let your
ngers rest over the front or right
edge of the Compact Belt Sander. If
the sanding belt should run off, or if
it is not properly adjusted, your n-
gers could come in contact with the
moving belt possibly causing serious
personal injury.
Severe pinching hazard. e. Keep
hands and ngers clear of front roller
at all times. Failure to do so may
result in ngers being pinched and/or
other personal injury.
WARNING! To reduce the risk of injury,
always secure work to prevent it from
being thrown back towards the user.
Hold this Compact Belt Sander by f.
the insulated gripping surfaces
when performing a job near electri-
cal wiring. This will help keep you
safe if electrical contact is made.
Clean this Compact Belt Sander g.
frequently to prevent buildup of
debris on moving parts. Built up
debris may y from the power tool
causing personal injury.