Troubleshooting

Problem

Possible Causes

Likely Solutions

Tool will not start.

Battery not charged.

Charge Battery.

Performance

Accessory dull or damaged.

Keep accessories sharp. Replace as needed.

decreases over

 

 

time.

 

 

Excessive noise

Internal damage or wear.

Have technician service tool.

or rattling.

 

 

Tool chatters

Low Torque setting.

Select higher Torque setting.

when tightening

 

 

fasteners

 

 

Overheating.

1. Forcing tool to work too

1. Allow tool to work at its own rate.

 

fast.

2. Keep cutting accessories sharp. Replace

 

2. Accessory dull or

as needed.

 

damaged.

3. Wear ANSI-approved safety goggles and

 

 

NIOSH-approved dust mask/respirator while

 

3. Blocked motor housing

blowing dust out of motor using compressed

 

vents.

air.

Follow all safety precautions whenever diagnosing or servicing the tool. Disconnect power supply before service.

Record Product’s Serial Number Here:

Note: If product has no serial number, record month and year of purchase instead.

Note: Some parts are listed and shown for illustration purposes only, and are not avail- able individually as replacement parts.

SKU 67089

For technical questions, please call 1-800-444-3353.

Page 9

Page 9
Image 9
Chicago Electric 67089 operating instructions Troubleshooting, Problem Possible Causes Likely Solutions