SAFETY
SETUP
Specifications
Electrical Rating | 120VAC / 60Hz / 10A | |
|
| |
Motor No Load Speed | 5500 RPM | |
|
| |
Maximum Blade Diameter | 7‑1/4" | |
|
| |
Arbor | 5/8" | |
|
| |
Depth of Cut | 2‑7/16" @ 90° | |
1‑5/8” @ 45° | ||
| ||
Bevel Capacity | 0° to 45° | |
|
| |
Laser Battery Type | 2 AAA (included) | |
|
|
4005982
Setup - Before Use:
LASER LIGHT
DO NOT STARE INTO BEAM
Max. Output: <1 mW,
Wavelength: 650 nm
CLASS II LASER PRODUCT
This product complies with
21 CFR 1040.10 and 1040.11
Diode Mfr.: Zhenjiang Bouncer Stone
Electron Co., LTD, No. 16 Guyang
Xincun Dingmao Zhenjiang City.China
Manufacture Date: ___________, ______
Caution: Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure.
Caution: The use of optical instruments with this product will increase eye hazard.
Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this manual including all text under subheadings therein before set up or use of this product.
Note: For additional information regarding the parts listed in the following pages, refer to Parts List and Diagram on page 14.
Functions
OPERATION
MAINTENANCE
|
|
| Auxiliary Handle Trigger (18) | Trigger Lock |
|
|
|
| Main Handle |
|
|
| Spindle Lock Lever (14) |
|
|
|
| Angle Gauge |
|
| Stationary Guard (30) |
| ||
|
|
| Power ON Light (6) | Depth Lever (58) |
|
|
|
| |
| Dust Outlet |
|
| Depth Gauge (62) |
|
|
| Lower Guard (39) | |
Lower Guard Lever |
| Laser Switch (82) |
| |
| Laser (83) |
| ||
|
|
|
| |
|
|
| Angle Lock Knob (71) | |
| Saw Blade |
|
|
|
(Sold separately) |
| Fence Lock Knob (69) | ||
|
|
| ||
| Outer Flange (32) |
| Base (64) |
|
| Blade Bolt (31) |
| ||
|
|
| ||
Figure 1 |
|
|
|
|
Page 10 |
| For technical questions, please call | Item 69078 | |
