Page 4 For technical questions, please call 1-800-444-3353. SKU 91780
18. Hook onto the object using
a pulling point, tow strap or
chain. Do not wrap the
wire rope around the
object and hook onto the
wire rope itself. This can cause damage
to the object being pulled, and kink or
fray the wire rope.
19. Secure load after moving.
NO LOCKING MECHANISM.
20. Do not use a Recovery Strap while
winching. They are designed to stretch
and can suddenly whip back towards the
operator during a winching operation.
21. Keep at least 5 full turns of wire rope on
drum.
22. If wire rope begins to get entangled, stop
winch immediately and release wire rope
using switch.
23.
45°
45°
15°
15°
Do not operate the winch at extreme
angles - do not exceed the angles shown
above.

SERVICE PRECAUTIONS

1. Wear ANSI-approved safety goggles
during installation, operation and service.
2. Use supplied power cords/wire rope or
cables listed in manual only. Do not use
thinner/longer cables or link multiple
cables together.
3. Have the winch serviced by a qualied
repair person using only identical
replacement parts. This will ensure that
the safety of the winch is maintained.
4. Maintain labels and nameplates on the
winch. These carry important safety
information. If unreadable or missing,
contact Harbor Freight Tools for a
replacement.
5. WARNING: Handling the cord on this
product will expose you to lead, a
chemical known to the State of California
to cause cancer, and birth defects or
other reproductive harm. Wash hands
after handling. (California Health &
Safety Code § 25249.5, et seq.)
SAVE THESE INSTRUCTIONS.