Solenoid

Bracket mounted to

Tie Bar (10w) ends

Assembly (34w)

 

Motor Cables (17s & 24s)

Motor

Bracket

Figure 8

Tie-down

Strap (41w)

2.To attach the Solenoid Assembly/Bracket to the Motor Assembly:

a.Slide the Bracket Tie-down Strap (41w) over the hook in the center of the Solenoid Bracket (40w).

b.Unthread the two Bolts (12-1w) and Nuts (13w) from the motor end of the Tie Bars (10w).

c.Rotate the Solenoid Assembly/Bracket so that the holes on the side of the Bracket line up with the end of the Tie Bars (10w).

d.Re-insert and tighten the Bolts (12-1w) and Nuts (13w), securing the Solenoid Bracket to the Tie Bar.

e.Secure the Solenoid Bracket to the Motor by tightening the Bracket Tie Down Strap (41w) around both the Solenoid Bracket hook and the Motor Assembly. Pull the Strap until secure.

Wiring

TO PREVENT

SERIOUS INJURY

FROM EXPLOSION DUE TO

SPARKING AT THE BATTERY

CONNECTION:

Turn the Power Switch of the winch off and disconnect the power and control cables before making wiring connections.

TO PREVENT SERIOUS INJURY

FROM LEAKING BATTERY ACID: Do not use a dirty, corroded or leaking battery. Only use a 12V automotive (or equivalent) battery, in good condition.

1.Plan a route for the wiring from the point of the vehicle where the winch will be mounted or used to the battery. This route must be secure, out of the way of moving parts, road debris, or any possibility of being damaged by operation or maintenance of the vehicle. For example, you may wish to route the wires under the vehicle, attaching it to the frame using suitable fasteners. Do not attach the wires to the exhaust system, drive shaft, emergency brake cable, fuel line, or any other components which may damage wiring through heat or motion, or create a fire hazard.

2.If you drill through the bumper or any part of the body to route the wires, be sure to install a rubber grommet in the hole to prevent fraying of the wires at that point.

3.Route the Battery Cables (13s & 16s) from the point the winch will be used to the battery, following the precautions discussed above.

4.Attach the red Battery Cable (13s) to the positive terminal on the battery.

5.Attach the black Battery Cable (16s) to the negative terminal of the battery.

SKU 91780

For technical questions, please call 1-800-444-3353.

Page 9

Page 8 Page 10
Page 9
Image 9
Chicago Electric 91780 operating instructions Wiring, To Prevent Serious Injury
Page 8 Page 10

91780 specifications

The Chicago Electric 91780 is a versatile and highly regarded tool in the realm of woodworking, primarily known for its exceptional performance as a thickness planer. This device is designed to cater to both amateur woodworkers and seasoned professionals, making it an essential addition to any workshop.

One of the standout features of the Chicago Electric 91780 is its powerful 15 amp motor. This robust motor enables the planer to tackle various types of hardwoods with ease, allowing users to achieve smooth and consistent finishes. With an impressive planing capacity of up to 6 inches in thickness and a maximum width of 12 inches, the 91780 excels at handling substantial workpieces, making it ideal for projects that require precision and efficiency.

Additionally, the Chicago Electric 91780 is equipped with a durable, steel cutter head that houses two high-speed steel blades. This design not only enhances cutting performance but also contributes to prolonged blade life. Users can expect a clean, accurate cut, thanks to the planer’s ability to make passes at varying depths, which can be adjusted to suit the specific needs of any job.

The user-friendly design of the 91780 ensures that even those unfamiliar with thickness planers can operate it with confidence. The machine features an easy-to-read depth adjustment knob, allowing users to quickly set the desired thickness. Furthermore, the built-in dust port helps maintain a clean workspace by efficiently removing wood shavings and debris during operation.

In terms of safety, the Chicago Electric 91780 includes several safety features such as a safety lock switch that prevents accidental starts, ensuring that users can operate the tool safely. The sturdy construction of the machine, combined with non-slip feet, guarantees stability during operation, reducing vibrations and enhancing overall control.

Overall, the Chicago Electric 91780 thickness planer combines power, precision, and user-friendly features, making it an excellent choice for anyone involved in woodworking. Its performance, durability, and safety elements provide users with the confidence to tackle a wide range of projects, ensuring each piece of wood is transformed with the utmost care and accuracy. Whether one is crafting furniture, cabinetry, or intricate wood designs, the Chicago Electric 91780 stands out as a reliable partner in achieving flawless results.
Top Page Image Contents