9.Use the Wrench (109) to unscrew and remove the Spindle Bolt (58).
NOTE: The Spindle Bolt unscrews in a clockwise direction. Then, remove the Outer Flange (57). (See Figure I.)
SPINDLE BOLT (58)
|
| CLOCKWISE | |
|
| TO LOOSEN | |
|
| ||
|
| COUNTERCLOCKWISE | |
OUTER FLANGE (57) | |||
TO TIGHTEN | |||
|
| ||
FIGURE I
10.Release pressure on the Spindle Lock (84). (See Figure H.)
11.Wearing heavy duty work gloves to avoid accidental cuts, remove the old Saw Blade (56). (See Figure J.)
SAW BLADE
(56)
FIGURE J
12.Install the new Saw Blade (56), making sure the teeth of the Saw Blade are pointing downward. (See Figure D.)
13.Reassemble the Outer Flange (57), and Spindle Bolt (58) firmly.
(See Figure I.)
14.Swing the Large Cover (47) and Safety Cover (53) back in place, making sure the Safety Cover covers the Saw Blade (56). (See Figure G.)
15.Reinstall the Bolt (50), and retighten the Screw (48). (See Figure G.)
16.Make sure the Safety Cover (53) returns to its original position prior to operating the Miter Saw.
17.CAUTION! Make sure to pull out on the Cross Pin (28). Turn the Cross Pin 90 degrees. Then, insert the Cross Pin into the shallow slot in its unlocked position. NEVER use the Cross Pin in any cutting operation. (See Figure E.)
SKU 91995 | For technical questions, please call | Page 14 |
