SPECIFICATIONS
Electrical Requirements | 120 V / 60 Hz / 1800 Input Watts. |
|
| 15.0 AMPs Start Up / 5300 RPM No Load. | E105017 |
| Three Prong, Grounded, Power Cord Plug. | |
| Power Switch Type: Squeeze Type. |
|
Saw Blade (Included) Diameter/Type | 10” Diameter / 60 Teeth. |
|
| 7,000 Maximum RPM. |
|
Arbor Size | 5/8” Diameter. |
|
Crosscut Capacity |
| |
|
| |
Blade Tilt Capacity | 0° - 45° Left and Right. |
|
Positive Stops | 0°, 15°, 22.5°, 30°, 45° Left and Right. |
|
Overall Table Size |
| |
Accessories Included | Dust Bag / Extension Holders (Qty. 2). |
|
UNPACKING
When unpacking, check to make sure all the parts shown on the Parts List on page 23 are included. If any parts are missing or broken, please call Harbor Freight Tools at the number shown on the cover of this manual as soon as possible.
SAVE THIS MANUAL
You will need this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures, parts list and assembly diagram. Keep your invoice with this manual. Write the invoice number on the inside of the front cover. Keep this manual and invoice in a safe and dry place for future reference.
GENERAL SAFETY RULES
WARNING! Read all instructions
Failure to follow all instructions listed below may result in electric shock, fire, and/or serious injury. The term “power tool” in all of the warnings listed below refers to your
SAVE THESE INSTRUCTIONS
WORK AREA
1.Keep your work area clean and well lit. Cluttered benches and dark areas invite accidents.
2.Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust. Power tools create sparks which may ignite flammables.
Rev 07k
SKU 91995 | For technical questions, please call | Page |