SERVICE
1.Tool service must be performed only by qualified repair personnel. Service or maintenance performed by unqualified personnel could result in a risk of injury.
2.When servicing a tool, use only identical replacement parts. Follow instructions in the “Inspection, Maintenance, And Cleaning” section of this manual. Use of unauthorized parts or failure to follow maintenance instructions may create a risk of electric shock or injury.
SPECIFIC SAFETY RULES
1.Maintain a safe working environment. Keep the work area well lit. Make sure there is adequate surrounding workspace. Always keep the work area free of obstructions, grease, oil, trash, and other debris. Do not use the Miter Saw in areas near flammable chemicals, dusts, and vapors. Do not use this product in a damp or wet location.
2.Maintain labels and nameplates on the Miter Saw. These carry important information. If unreadable or missing, contact Harbor Freight Tools for a replacement.
3.Do not force the equipment. This Miter Saw will do the work better and safer at the speed and capacity for which it was designed.
4.Keep all guards in place and in working order. Never remove or disable guards.
5.Remove all adjusting wrenches from the Miter Saw before turning it on.
.Do not abuse the Power Cord. Do not use the Power Cord to pull its Plug from an electrical outlet. Keep the Power Cord away from heat, oil, sharp edges, and moving parts. Route the Power Cord safely. Protect the Power Cord from being damaged by other equipment in the work area. Do not route the Power Cord where it can be walked on or tripped over. Replace a damaged Power Cord immediately.
.Do not use this Miter Saw for cutting metals or brittle materials. Do not cut dangerous materials, such as asbestos which can cause harmful dust or vapors.
.When replacing the Saw Blade, make sure the new Saw Blade has a diameter of 10”, an RPM rating of at least 7000, and has an arbor hole of 5/8” diameter.
9.To avoid accidental injury, always wear heavy duty work gloves when changing a Saw Blade.
Rev 07k
SKU 91995 | For technical questions, please call | Page |
