INSPECTION, MAINTENANCE,
AND CLEANING
TO PREVENT SERIOUS INJURY
FROM ACCIDENTAL OPERATION:
Unplug the Power Cord (43) from its electrical outlet before performing any inspection, maintenance, or cleaning procedures.
1.BEFORE EACH USE, inspect the general condition of the Drywall Screwdriver. Check for loose screws, misalignment or binding of moving parts, damaged electrical wiring, damaged accessories, and any other condition that may affect its safe operation. If abnormal noise or vibration occurs, have the problem corrected before further use.
Do not use damaged equipment.
2.AT LEAST ONCE WEEKLY: With the Drywall Screwdriver running, blow dirt and dust out of all air vents of the tool with dry air. Also, the Depth Collar (2) should be removed and drywall dust blown out of the Clutch Housing (5). Be sure to wear safety impact eye goggles when performing these procedures.
3.TO CLEAN THE EXTERIOR PLASTIC PARTS: Use only a clean cloth and mild detergent to clean the body of the Drywall Screwdriver. Do not use solvents. Do not immerse any part of the tool in liquid.
PLEASE READ THE
FOLLOWING CAREFULLY
THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER OR DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE
OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT, OR THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT. IN FACT, THE MANUFACTURER AND/OR DISTRIBUTOR EXPRESSLY STATES THAT ALL REPAIRS AND PARTS REPLACEMENTS SHOULD BE UNDERTAKEN BY CERTIFIED AND LICENSED TECHNICIANS, AND NOT BY THE BUYER. THE BUYER ASSUMES ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO.
Page 10 | For technical questions, please call | SKU 9624 |
