4.Closely inspect the Grinding Wheel before mounting. Perform a ring-test on the wheel (unless wheel is smaller than 4” or is an unusual shape) as follows:

a.Suspend wheel using a pin or finger through the arbor hole.

45°

45°

Hang

V

Wheel

E

R

from

T

C

 

I

Pin

A

 

L

Tap

 

Wheel

C

Here

E

 

N

 

T

 

E

 

R

45°

45°

b. Tap the flat side of the wheel with a light non-metallic object, such as a screwdriver handle, at a point 45° from the vertical center line on each side of the wheel and 1 – 2 inches from the edge of the wheel (see Il- lustration).

c. Rotate the wheel 45 degrees and repeat the test until the entire wheel has been checked.

d. An undamaged wheel will give a clear tone. If cracked, there will be a dead sound and not a clear ring.

5.Slip the grinding wheel onto the Spin- dle with a paper gasket, or blotter, first. The blotter should be centered on the grinding wheel and the wheel and blotter should rest flat against the

Inner Flange.

WARNING: To prevent serious injury, blotters must be used for all grinding wheels they are provided

with. Blotters help prevent grind- ing wheel damage and wheel slip- page, causes of wheel failure.

6.Thread the Outer Flange Arbor Nut onto the Spindle. Wrench tighten

only enough so that the wheel is se- curely held on the spindle.

WARNING: To prevent serious injury, do not overtighten flange. Overtightening can damage the wheel, causing wheel failure.

Installing a Threaded Accessory

To Prevent Injury:

Wear heavy-duty work gloves when handling wire wheels and brushes. These accessories are sharp and can cause injury.

1.Before installing an accessory, review the warnings on pages 5 - 7.

The accessory MUST be:

•rated to at least 10,500 RPM.

•no larger than 4-1/2” in diameter.

•fitted with a threaded opening of 5/8” x 11 TPI.

•undamaged.

•a sanding disc and backing pad, a sanding flap disc, a wire wheel or a wire cup brush (accessories not included).

2.Press in and hold the Spindle Lock

Button (26) to prevent the Spindle (9) from turning.

3.Remove the Outer Flange Arbor Nut

(1) and the Inner Flange (2) and keep in a safe place.

4.Thread disc accessory firmly onto the Spindle. Wrench tighten onto the spindle.

SKU 98107

For technical questions, please call 1-800-444-3353.

Page 14

Page 13 Page 15
Page 14
Image 14
Chicago Electric 98107 operating instructions Wheel From, Wheel Here
Page 13 Page 15

98107 specifications

The Chicago Electric 98107 is a powerful and versatile tool designed for cutting and shaping materials in a variety of projects. Known for its reliability and innovative features, this product has become a favorite among both DIY enthusiasts and professional users.

One of the standout characteristics of the Chicago Electric 98107 is its robust motor, which delivers exceptional power and efficiency. With a 12-amp motor, this tool can handle a wide range of cutting tasks, from thick hardwoods to softer materials like plastic and metal. Its variable speed control allows users to adjust the speed according to the material being cut, ensuring precision and reducing the risk of damaging the workpiece.

The Chicago Electric 98107 features a durable and lightweight design that enhances portability. Weighing in at just around 10 pounds, it is easy to maneuver and transport, making it an ideal choice for on-the-job use or home workshops. The ergonomic grip provides comfort during extended use, reducing fatigue and improving control when tackling tough cuts.

Another significant advantage of the Chicago Electric 98107 is its compatibility with a variety of blades. The tool utilizes a quick-release blade change mechanism, allowing users to swap out blades efficiently without the need for additional tools. This flexibility enables users to select the best blade for their specific project, whether they are making intricate cuts or straight lines.

Safety features are paramount in power tools, and the Chicago Electric 98107 does not disappoint. It includes a safety switch that prevents accidental start-ups, ensuring that users can work with confidence. Additionally, the design incorporates a protective guard that shields users from debris and sharp edges during operation.

In terms of technology, the Chicago Electric 98107 also boasts advanced features such as an integrated laser guide. This tool helps users align their cuts with precision, ensuring accuracy in every project. The laser guide is a valuable addition, especially for intricate work where even a slight misalignment can lead to errors.

Overall, the Chicago Electric 98107 stands out as a high-performance tool that combines power, precision, and safety. Its adaptability, user-friendly features, and durable construction make it an essential addition to any workshop, whether for hobbyists looking to complete weekend projects or professionals seeking reliable equipment for demanding tasks. With this tool in hand, users can confidently take on a multitude of cutting challenges with ease.
Top Page Image Contents