Troubleshooting

side while you remove the carbon brushes. Keep track of which ori- entation the old carbon brushes were in to prevent needless wear if they will be reinstalled.

e. If either carbon brush is worn down by more than 1/2, replace both car- bon brushes.

f.To clean old carbon brushes before reusing them, rub the contact areas with a pencil eraser.

g.Hold the spring clips to the side and reinsert the old carbon brushes in the same orientation to reduce wear.

h.When installing the carbon brushes, make sure the carbon portions of

the carbon brushes contact the mo- tor armature, and that the indented portions of the brushes are posi- tioned where the springs contact. Also, make sure the springs operate freely.

i.Reconnect the Carbon Brush Leads.

j.Replace the Brush Caps and Screws. Do not overtighten.

Note: New carbon brushes tend to spark when first used until they wear and conform to the motor’s armature.

5.WARNING! If the supply cord of this power tool is damaged, it must be replaced only by a qualified service technician.

Problem		Possible Causes		Likely Solutions
Tool will not start	1.	No power at outlet.	1.	Check power at outlet.
	2.	Cord not connected.	2.	Check that cord is plugged in.
	3.	Carbon Brushes may be worn or	3.	Inspect Carbon Brushes and replace if
		damaged.		necessary.
Tool operates	1. Carbon Brushes may be worn or		1.	Inspect Carbon Brushes and replace if
slowly or		damaged.		necessary.
erratically.	2.	Excess pressure applied to	2.	Decrease pressure, allow tool to do
		workpiece.		the work.
Tool does not	1. Disc accessory may be loose on		1.	Be sure disc accessory is of correct
grind, sand or		Spindle. Check tightness of Outer		dimension and Outer Flange Arbor Nut
brush effectively.		Flange Arbor Nut or threaded disc		is tight.
		accessory on Spindle.
	2.	Disc accessory may be damaged,	2.	Check condition and type of disc
		worn or wrong type for the		accessory. Use only proper type of
		material.		disc accessory in good condition.

Follow all safety precautions whenever diagnosing or servicing the tool. Disconnect power supply before service.

SKU 98107

For technical questions, please call 1-800-444-3353.

Page 17

98107 specifications

The Chicago Electric 98107 is a powerful and versatile tool designed for cutting and shaping materials in a variety of projects. Known for its reliability and innovative features, this product has become a favorite among both DIY enthusiasts and professional users.

One of the standout characteristics of the Chicago Electric 98107 is its robust motor, which delivers exceptional power and efficiency. With a 12-amp motor, this tool can handle a wide range of cutting tasks, from thick hardwoods to softer materials like plastic and metal. Its variable speed control allows users to adjust the speed according to the material being cut, ensuring precision and reducing the risk of damaging the workpiece.

The Chicago Electric 98107 features a durable and lightweight design that enhances portability. Weighing in at just around 10 pounds, it is easy to maneuver and transport, making it an ideal choice for on-the-job use or home workshops. The ergonomic grip provides comfort during extended use, reducing fatigue and improving control when tackling tough cuts.

Another significant advantage of the Chicago Electric 98107 is its compatibility with a variety of blades. The tool utilizes a quick-release blade change mechanism, allowing users to swap out blades efficiently without the need for additional tools. This flexibility enables users to select the best blade for their specific project, whether they are making intricate cuts or straight lines.

Safety features are paramount in power tools, and the Chicago Electric 98107 does not disappoint. It includes a safety switch that prevents accidental start-ups, ensuring that users can work with confidence. Additionally, the design incorporates a protective guard that shields users from debris and sharp edges during operation.

In terms of technology, the Chicago Electric 98107 also boasts advanced features such as an integrated laser guide. This tool helps users align their cuts with precision, ensuring accuracy in every project. The laser guide is a valuable addition, especially for intricate work where even a slight misalignment can lead to errors.

Overall, the Chicago Electric 98107 stands out as a high-performance tool that combines power, precision, and safety. Its adaptability, user-friendly features, and durable construction make it an essential addition to any workshop, whether for hobbyists looking to complete weekend projects or professionals seeking reliable equipment for demanding tasks. With this tool in hand, users can confidently take on a multitude of cutting challenges with ease.

Chicago Electric 98107 Troubleshooting, Problem Possible Causes Likely Solutions

Models: 98107