Work Piece and Work Area Set Up
1.Designate a work area that is clean and
2.Route the power cord along a safe route to reach the work area without creating a tripping hazard or exposing the power cord to possible damage. The power cord must reach the work area with enough extra length to al- low free movement while working.
3.There must not be hazardous ob- jects, such as utility lines or foreign objects, nearby that will present a hazard while working.
4.Clean the surface to be painted thor- oughly prior to beginning operations.
General Operating Instructions
Fill the pump with oil:
Oil Cap | Lubrication |
| Button |
hydraulic oil. Replace the cap and set the unit upright.
2.Push the lubrication button on the face of the unit ten times to lubricate the system before each use.
3.Press the lubrication button every eight hours of use.
Purge and prime the Sprayer:
4.Before each use; the Sprayer must be purged and primed.
5.Place the suction tube into a contain- er of paint.
6.Secure the return tube to a metal waste container.
7.Turn the pressure control dial to maximum pressure and turn the “PRIME/SPRAY” knob to the “PRIME” position.
Hose 
Priming
Connection Button
1.Lay the pump on its back and remove the oil cap. Fill with a good quality
|
|
|
|
|
|
|
|
|
|
Pressure | Power | Hose | ||
Control | Switch | Connection | ||
Dial |
|
|
| |
8.Push the Priming Button several times.
9.Plug the power cord of the Sprayer into a grounded 120V electric outlet and push the power switch of the Sprayer to the “ON” position.
REV 08j
SKU 99702 | For technical questions, please call | Page 11 |
