Changing the speaker setup
Set whether or not speakers are connected to the AV receiver or amplifier, as well as the size of the speakers. This setting is only valid for the AUDIO OUT (7.1 ch) terminals.
Caution
•The Speaker Setup cannot be selected when Audio Output Mode is set to 2 Channel. Change the setting to
1Select and set Speakers Speaker Setup Next Screen. Use / to select, then press ENTER.
2Select the speaker and change the setting.
Use / to select, then use / to change the setting.
Speaker Setup
BD PLAYER
L/R 
Large
CLarge
SL/SR Large SBL/SBR Large
SW Yes
•L/R (front left and right speakers): Large/Small
•C (center speaker): Large/Small/None
•SL/SR (left and right surround speakers): Large/Small/None
•SBL/SBR (left and right surround back speakers): Large/Small/
None
•SW (subwoofer): Yes/No
Note
•Depending on the combination of settings of the different speakers, the settings of speakers other than the one you have changed may also change automatically.
Adjusting the distance of the different speakers
Adjust the distance between you and the different speakers. This setting is only valid for the AUDIO OUT (7.1 ch) terminals.
2 Select the speaker and adjust the distance. | 06 | |
Use / to select, then use / to adjust. | ||
|
Speaker Distance
BD PLAYER
L
10’00” 
C10’00”
R10’00”
SR | 10’00” |
SBR | 10’00” |
SBL | 10’00” |
SL | 10’00” |
SW | 10’00” |
•The distance of all the speakers can be set to between 1 inch and 45 feet, in units of 1 inch.
Adjusting the output level of the different speakers (Channel Level)
Adjust each output level of the different speakers by using test tones. This setting is only valid for the AUDIO OUT (7.1 ch) terminals.
Caution
•This cannot be selected when Audio Output Mode is set to 2 Channel. Change the setting to
•Channel Level of the speakers set to None or No at Speaker Setup cannot be adjusted (above).
•Test tones are output. Lower the volume of the device connected to the player.
1Select and set Speakers Channel Level, then Fix or
Variable.
Use / to select, then press ENTER.
•Fix – The output level of all the speakers is set to the maximum.
•Variable – The output level of all the speakers is set 6.0 dB lower than when Fix is selected. From this point, the output levels of the L, C, R, SL, SR, SBL, SBR and SW speakers can be adjusted within the range of
If you have selected Variable, proceed to step 2.
2Select and set the method for switching the speaker to be
adjusted.
Use / to select, then press ENTER.
Caution
•This cannot be selected when Audio Output Mode is set to 2 Channel. Change the setting to
•Speaker Distance of the speakers set to None or No at Speaker Setup cannot be adjusted (above).
1Select and set Speakers Speaker Distance Next
Screen.
Use / to select, then press ENTER.
Video Out
Audio Out
Speakers
HDMI MAIN
HDMI SUB
Playback
Language
Parental Lock
Speaker Setup
BD PLAYER
Test Tone Switching
Select whether test tone output is switched automatically or manually.
Auto |
| Manual |
•Auto – Switch the speaker to be adjusted automatically.
•Manual – Switch the speaker to be adjusted manually.
47
En
