Pioneer BDP-09FD Software updating, Problem Check Sound is fast or slow, Cables?

07	Problem	Check
	Sound is fast or slow.	When an HDMI cable is connected, are audio signals being
		output from devices connected with cables other than HDMI
		cables?

Remedy

When a Pioneer AV receiver or amplifier compatible with the PQLS function is connected directly to the player’s HDMI OUT (MAIN) terminal using an HDMI cable, the PQLS function is activated when playing an audio CD (CD-DA). Because of this, the sound output from components other than the ones connected by HDMI cable may be fast or slow. If this happens, set PQLS to Off (page 45).

After a disc is inserted,	Are there too many files recorded on the disc?	When a disc on which files are recorded is inserted, depending
Loading stays displayed and		on the number of files recorded on the disc, loading may take
playback does not start.		several dozen minutes.
 is displayed in file names,		The characters that cannot be displayed on this player are
etc.		displayed in .
A message indicating low		Erase the BDMV data (page 51).
memory (local storage)
appears while playing a
BD-ROM disc.
The DVD layer of BD and DVD	Is Hybrid Disc Playback properly set?	Set Hybrid Disc Playback to DVD (page 45).
hybrid discs cannot be
played.
The CD layer of BD and CD	Is Hybrid Disc Playback properly set?	Set Hybrid Disc Playback to CD (page 45).
hybrid discs cannot be
played.

The BDMV format on BD-R/ -RE discs cannot be played.

To play the BDMV format on BD-R/-RE discs containing both BDMV and BDAV formats, set BDMV/BDAV Playback Priority to BDMV (page 45).

Software updating

Problem Check Remedy

“Connection to the software updating server failed” is displayed when you try to update the software.

Software updating is slow.

Perform Connection Test (page 51). If “Network connection test completed successfully.” is displayed, check the proxy server settings (page 50). Also there may be a problem with the Internet connection. Contact your Internet service provider.

Depending on the Internet connection and other conditions, some time may be required to update the software.

	• “WRT NG ****” is displayed		The message is displayed when software updating has failed.
	on the front panel display		Check again whether it can be updated properly.
	during software updating.
	(**** meaning any
	characters)
	• “WRT FAILED” is displayed
	on the front panel display
	during software updating.
	A message other than	Is “LAN cable not connected” displayed?	Check that this player and Ethernet hub (or router with hub
	“Network connection test		functionality) are properly connected.
	completed successfully” is
		• Is “IP address cannot be obtained.” displayed?	• If the IP address is obtained using the DHCP server function,
	displayed when Connection
	Test is performed.	• Is “No response from the gateway.” displayed?	check the setting is correct at the Display Network
			Configuration (page 51). For details on the DHCP server
			function, see the operating instructions of the Ethernet hub (or
			router with hub functionality).
			• Set the IP address manually.
		Is “IP address is overlapped.” displayed?	• Check the operation and settings of the DHCP server
			function of the Ethernet hub (or router with hub functionality).
			For details on the DHCP server function, see the operating
			instructions of the Ethernet hub (or router with hub
			functionality).
			• If this player’s has been set manually, reset the IP address of
			this player or other components.
		Is the Ethernet hub (or router with hub functionality) operating	• Check the settings and operation the Ethernet hub (or router
		properly?	with hub functionality). For details, see the operating
			instructions of the Ethernet hub.
68			• Reboot the Ethernet hub (or router with hub functionality).

En