Pioneer BDP-09FD operating instructions Others, Is Auto Power Off set to On?, Control in terminal

KURO LINK 07

Problem

KURO LINK function does not work.

Check	Remedy
• Is the HDMI cable properly connected?	To use the KURO LINK function, connect the Flat Panel TV and
• Are you connected to the HDMI OUT (SUB) terminal?	AV system (AV receiver or amplifier, etc.) to the HDMI OUT
	(MAIN) terminal (page 16).

Is the HDMI cable you are using a High Speed HDMI™ cable? Use a High Speed HDMI™ cable. The KURO LINK function may not work properly if HDMI cable other than a High Speed HDMI™ cable is used.

Is KURO LINK set to On on the player? Set KURO LINK to On on the player (page 45).

Does the connected device support the KURO LINK function? • The KURO LINK function will not work with devices manufactured by companies other than Pioneer, even when connected using an HDMI cable.

	• The KURO LINK function will not work if devices that do not
	support the KURO LINK function or devices manufactured by
	companies other than Pioneer are connected between the
	KURO LINK-compatible device and the player.
	• Even when connected to a Pioneer product compatible with
	the KURO LINK function, some of the functions may not work.
	Also refer to the operating instructions of the connected
	device.
Is KURO LINK set to On on the connected device?	Set KURO LINK to On on the connected device. The KURO
	LINK function operates when KURO LINK is set to On for all
	devices connected to the HDMI OUT (MAIN) terminal.
	Once connections and settings of all the devices are finished,
	be sure to check that the player’s picture is output to the Flat
	Panel TV. (Also check after changing the connected devices
	and connecting and/or disconnecting HDMI cables.) If the
	player’s picture is not being output to the Flat Panel TV, the
	KURO LINK function may not work properly.
	For details, refer to the operating instructions of the connected
	device.
Are multiple players connected?	The KURO LINK function may not work if three or more players,
	including this player, are connected by HDMI cable.

Others

Problem	Check	Remedy
The player’s power turns off	Is Auto Power Off set to On?	If Auto Power Off is set to On, the player’s power turns off
automatically.		automatically if no operation is performed for over 30 minutes
		(page 46).

The player’s power turns on Is KURO LINK set to On? or off automatically.

The player’s power may turn on and off together with the power of the TV connected to the HDMI OUT (MAIN) terminal. If you do not want the player’s power to turn on and off when the TV’s power is turned on and off, set KURO LINK to Off (page 45).

Player cannot be operated	Is an AV receiver or amplifier connected to the CONTROL IN	Operate with the remote control of the device connected to the
with remote control.	terminal on the player’s rear panel?	CONTROL IN terminal.
	Are you operating the remote control from a point too far away	Operate from within 23 feet of the remote control sensor.
	from the player?
	Are the batteries dead?	Replace the batteries (page 7).
Input of connected TV and AV	Is KURO LINK set to On?	The input of the TV and AV system (AV receiver or amplifier,
system switches		etc.) connected to the HDMI OUT (MAIN) terminal may
automatically.		automatically switch to the player when playback starts on the
		player or the menu screen (Home Media Gallery, etc.) is
		displayed. If you do not want the inputs of the connected TV
		and AV system (AV receiver or amplifier, etc.) to switch
		automatically, set KURO LINK to Off (page 45).

69

En