•The items below do not apply to video signals output from the VIDEO and
– Sharpness High | – Sharpness Mid | |
– Detail | – White Level | |
– | Black Level | – Gamma Correction |
– | Hue | – Chroma Level |
Closing the Video Adjust screen
Press 
HOME MENU.
About Pure Cinema
There are two types of video signals:
•Video material – Video signals recorded at 30 frames/second
•Film material – Video signals recorded at 24 frames/second
“Pure Cinema” uses signal processing suited for “film material” when converting 480i or 1080i interlaced video signals into progressive video signals, resulting in clear picture reproduction without losing the quality of the material.
is displayed on the disc information screen when playing the
“film material” pictures of
Adjusting the audio
Adjusting the Audio DRC
Audio DRC (Dynamic Range Control) has the effect of playing loud sounds softly and soft sounds loudly. Adjust the setting for example when viewing movies late at night and the dialogs are difficult to hear.
1 During playback, display the TOOLS menu.
Press 
TOOLS.
HOME MEDIA | DISPLAY | POPUP MENU |
GALLERY | ||
|
| MENU |
TOP MENU |
| TOOLS |
ENTER
2Select and set Audio Adjust. Use / to select, then press ENTER.
|
| TOP MENU | TOOLS |
|
|
|
| ENTER |
|
|
| HOME | RETURN |
|
|
| MENU |
| |
|
|
|
|
|
|
|
| ||
BD PLAYER |
|
| Audio |
|
TOOLS |
| Subtitle |
| |
Audio Adjust
Video Adjust
Secondary Audio
3 Select and set Audio DRC.
Use / to select, then press ENTER.
Audio Adjust
Audio DRC
Channel Level
Lip Sync
4 Adjust the setting.
TOP MENU | TOOLS |
| ENTER |
HOME | RETURN |
MENU |
Use / to switch between Off, Low, Medium, High and Auto.
Audio DRC
Off
Closing the Audio DRC screen
Press ENTER or 
HOME MENU.
Note
•This only affects the Dolby TrueHD, Dolby Digital Plus and Dolby Digital audio signals of BDs, DVDs and video files.
•When Auto is selected, the setting has the same effect as High or Off for Dolby TrueHD signals, depending on the content. For Dolby Digital Plus and Dolby Digital, the setting has the same effect as Off.
•Audio DRC affects the audio signals output from the following audio output terminals:
–Analog audio signals output from the AUDIO OUT (7.1 ch) terminals.
–Linear PCM audio signals output from the DIGITAL OUT terminals or HDMI OUT terminals.
•The effect may be weak for some discs.
Adjusting the output level of the different speakers during BD/DVD playback (Channel Level)
Caution
•Channel Level of the speakers set to None or No at Speaker Setup cannot be adjusted (page 47).
1 During playback, display the TOOLS menu.
Press 
TOOLS.
HOME MEDIA | DISPLAY | POPUP MENU |
GALLERY | ||
|
| MENU |
TOP MENU |
| TOOLS |
| ENTER |
|
05
41
En
