Preparing your projector (continued)
Bottom side
1
2
3
1Adjustment foot (Front)
2 Lamp cover
3 Adjustment feet (Rear)
Caution:
Do not replace the lamp immediately after using the projector because the lamp would be extremely hot and it may cause burns.
Remote control
1 | ON | POWER | OFF | 21 | |
20 | |||||
|
|
| |||
2 |
| COMPONENT |
| 19 | |
3 | HDMI | COMP | VIDEO | 18 | |
COMPUTER |
|
| |||
| PC |
|
| ||
4 |
| AV MEMORY |
|
| |
1 | 2 | 3 |
|
5 |
| ENTER |
| 17 |
|
|
|
| |
6 |
|
|
| 16 |
MENU |
| ASPECT | 15 | |
7 | CONTRAST | BRIGHTNESS COLOR TEMP | 14 | |
CNT | BRT | CT | ||
| SHARPNESS BrilliantColorTM | |||
9 | GAMMA | SHARP | BC | 12 |
|
|
| ||
8 | AUTO POSITION |
| KEYSTONE | 13 |
| AP | IRIS | KS |
|
1011
1ON ( I ) button
2 HDMI button
3 COMPUTER button
4 AV MEMORY buttons
5 ENTER button
6 MENU button
7 CONTRAST button*
8 GAMMA button*
9 AUTO POSITION button
10 SHARPNESS button*
11 IRIS button
12 KEYSTONE button
13 BrilliantColorTM button*
14 COLOR TEMP button*
15 ASPECT button
16 BRIGHTNESS button*
17 Direction buttons
18
19 VIDEO button
20 OFF (
) button
21 COMPONENT button
* : See below for the picture quality adjusting buttons. Important:
•When you press any button on the remote control, the buttons on the remote control are lit. Wait approx. 5 seconds after releasing the button to turn them off.
•The direction buttons are used for the keystone adjustment and fine adjustment ( and buttons only).
Using the picture quality adjusting buttons
When you press any of the picture quality adjusting buttons, the screen for adjusting the picture quality appears. Ad- just the picture quality by pressing the and buttons. The picture quality adjustment can be made alternatively in the IMAGE menu. (See page 24.) Items in the menus are shown in parentheses below.
CONTRAST (CONTRAST) ………… Adjusts the contrast of the projected image.
BRIGHTNESS (BRIGHTNESS) …… Adjusts the brightness of the projected image.
COLOR TEMP (COLOR TEMP.) …… Selects one of the preset color temperatures. Color adjustment of USER mode is
also available. (Refer to page 29.)
GAMMA (GAMMA MODE) ………… Selects one of the preset gamma mode. Adjustment of USER mode is also
available. (Refer to page 29.)
SHARPNESS (SHARPNESS) ……… Adjusts the sharpness of the projected image.
BrilliantColor™ (BrilliantColor™) … Adjusts the BrilliantColor™ of the projected image.
