2. INSTALLATION menu |
| |
ITEM | SETTING | FUNCTION |
LAMP MODE | STANDARD | Select this option when you want to view images in a |
| LOW | Select to moderate the intensity of the lamp. The fan operating sound is reduced |
|
| and the lamp lifetime becomes longer. |
LAMP TIME (LOW) | ****H | This item shows a lamp operating time (hour) when LAMP MODE is LOW. |
|
| • When the LAMP MODE is STANDARD, this item shows a longer lamp operat- |
|
| ing time than the actual time. (See page 33 for the interval of lamp replace- |
|
| ment.) |
CW SPEED | 4x / 5x | Use to change the rotation speed of the color wheel. Select 4x for normal use. |
|
| See page 30. |
AUTO POWER ON | ON / OFF | When ON is chosen, the lamp is automatically lit when the power cord is plugged |
|
| in the wall outlet. Choose ON when using the projector mounted on the ceiling. |
|
| • The projector is in the |
|
| control to turn on the lamp. |
AUTO POWER OFF | OFF / 5 - 60min | Use to set the time elapsed before the projector enters the |
|
| there is no signal input from the source. |
SPLASH SCREEN | ON / OFF | Choose ON to display the splash screen when the power is turned on. |
BACK COLOR | BLUE / BLACK | Use to change the color of the screen that appears when no signal is supplied. |
IMAGE REVERSE | OFF | Select when viewing images from the front with the projector installed on the |
|
| floor. |
| MIRROR | Select when viewing images projected from the behind of the screen with the |
|
| projector installed on the floor. |
| INVERT | Select when viewing images projected from the behind of the screen with the |
|
| projector installed on the ceiling. |
| MIRROR INVERT | Select when viewing images from the front with the projector installed on the |
|
| ceiling. |
TRIGGER OUT | ON / OFF | Choose ON to output the trigger output signal (12 V) from the TRIGGER terminal |
|
| when the lamp illuminates. |
TEST PATTERN CROSS HATCH | Select to show the test cross hatch pattern. | |
| WHITE | Select to show the maximum brightness image. |
| BLACK | Select to show the minimum brightness image. |
•When LAMP MODE has been set to LOW, the lamp mode changes from STANDARD to LOW about one minute after
•When the lamp mode is switched, the projected image may flicker. This is not a product malfunction.
•Do not change the setting of LAMP MODE frequently.
•To cancel the test pattern, press any button.
ENGLISH
