Viewing video images (continued)
When you connect this projector and a
•This depends on the black level setting of the connected device. There are two kinds of methods to digitally transfer image data, in which different black level settings are employed respectively. Therefore, the specifications of the signals output from DVD players differ, depending on the type of the digital data transfer method they use.
•Some DVD players are provided with a function to switch the methods to output digital signals. When your DVD player is provided with such function, set it as follows.
EXPAND or ENHANCED → NORMAL
• See the users guide of your DVD player for details.
•When your digital device does not have such function, adjust the BRIGHTNESS to +16 and CONTRAST to
B. Plugging in the power cord
HDMI IN
SERIAL USB
1
Earthing terminal
TRIG | 2 |
Power cord (example)
1.Plug the attached power cord into the power cord inlet of this projector.
2.Plug the other end of the power cord into a power outlet.
•Use the appropriate power cord for your country.
•This projector uses the power plug of
•Use
•Do not place any objects on the power cord or do not place the projector near heat sources to prevent damage to the power cord. If the power cord should be damaged, contact your dealer for replacement because it may cause fire or electric shock.
•Do not modify or alter the power cord. If the power cord is modified or altered, it may cause fire or electric shock.
Caution:
•Plug in the power cord firmly. When unplugging, hold and pull the power plug, not the power cord.
•Do not plug in or out the power cord with your hand wet. It may cause electric shock.
