FIGURE F
Front Cover with Support Leg (117)
1/4” MOUNTING HOLE | 1/4” MOUNTING HOLE |
3.Use two
To Remove/Install A Saw Blade:
WARNING! Prior to performing this procedure, make sure the Miter Saw is un- plugged from its electrical outlet.
When replacing a Saw Blade (51), make sure the new Saw Blade has a 10” diameter, rated to at least 4600 RPM, made to fit a 5/8” (0.625”) Spindle, and suited for the type of material being cut.
SAFETY COVER (58)
SAW BLADE (51)
FIGURE G
1.Lift up and hold the transparent Safety Cover (58) in place. (See Figure G.)
SKU 90891 | For technical questions, please call | Page 12 |
