Chicco 437 Folding the Stroller, Important Note, Tandem will accommodate, Figure 6 Figure 7

IMPORTANT NOTE

When using your stroller as an infant car seat carrier, the following are the compatible infant car seat models that the Caboose Stand-On

Tandem will accommodate:

•Graco® Snug Rider™ Series

•Graco® SafeSeat™

•Peg Perego® Primo Viaggio

•Peg Perego® Primo Viaggio SIP

•Evenfl o® Embrace™

•Chicco® Key Fit Car Seat

•Britax® Companion™

•Combi® Centre Series

•Combi® Connection

•Safety 1st® Designer 22™

•Eddie Bauer® Infant Car Seat (models 22-625 and 22-626)

•Baby Trend® Latch-Loc and Flex-Loc

•Compass® Light and Portable Infant Car Seat

For the most updated list of compatible infant car seats, please either check our website at www.joovy.com or call our Customer Service Department at (877) 6-09.

Folding the Stroller

•Keep children away from stroller while folding.

•Remove any infant carrier that has been installed on the stroller. Note that the stroller can still be folded with a car seat carrier support in place.

•Position the stroller with the handle bar closest to you.

•Place each canopy into its closed position and push it all the way forward toward the front of the stroller as far as it will go.

•Make sure both rear wheel brakes are set to their locked positions.

•Lock both front wheels in place with the locking levers facing forward.

•To fold, unlatch the safety latch on EACH side of the stroller.

•Pull upward on the trigger mechanisms on both sides of the stroller. See Figure 26.

•While these mechanisms are in the upward position, push forward on the stroller using the handle bar.

•Once the stroller begins to fold, push the handle all the way forward and down until the stroller is completely folded. See Figure 27.

Figure 6

Figure 7

Page 1 The Big Caboose Stand-On Triple Instruction Manual