Chief Manufacturing CTA-100 Making Adjustments, Step, Make Adjustments to Unit

Installation Instructions CTA-100

STEP 4

(40) and (30)

Figure 8. Make Adjustments to Unit

Making Adjustments

1.Install your VCR/DVD into the CTA-100.

2.Adjust the side plates (30) and adjustment plates (40) as needed to secure your VCR/DVD safely in the CTA-100. See Figure 8.

3.Tighten all cap screws (60).

WARNING

Failure to install and tighten the screws to secure your VCR/DVD can result in personal injury and/or equipment damage.

4.Check the CTA-100 to ensure that the side plates (30) and adjustment plates (40) are adjusted correctly. The unit should fit tightly around your VCR/DVD. If not, repeat steps 2 and 3 until your VCR/DVD is secure.

8