Chief Manufacturing KSA-1004, FSA-1004 installation instructions Small Flat Panel Lift Arm

I N S T A L L A T I O N I N S T R U C T I O N S

Small Flat Panel Lift Arm

FSA-1004 and KSA-1004

The Lift Arm FSA/KSA-1004 is an accessory that can be used with a broad range of Small Flat Panel Displays.

The FSA/KSA-1004 allows the user to move a display vertically up or down in a 13 inch radius. The lift arm can be moved vertically 6-1/2” up from center and 6-1/2” down from center.

The FSA/KSA-1004 is designed to safely hold a display weighing up to 25 lbs. (11.3kg). The display can be up to 30 inches wide.

The FSA/KSA-1004 accommodates all VESA® 75mm/100mm compliant displays.

BEFORE YOU BEGIN

Lift Arm

￿CAUTION: To prevent damage to the mount, which could affect or void the Factory warranty, thoroughly study all instructions and illustrations before you begin to install the mount brackets. Pay particular atten- tion to the “Important Precautions” on Page 2.

￿If you have any questions about this installation, contact Chief Manufacturing at 1-800-582-6480 or 952-582-6480.

CHIEF MANUFACTURING INC.	8832-000041 Rev. F
1-800-582-6480952-894-6280 FAX 952-894-6918	©2007 Chief Manufacturing
8401 EAGLE CREEK PARKWAY, STE. 700	www.chiefmfg.com
SAVAGE, MINNESOTA 55378 USA	03/07