Installation InstructionsFSA/KSA-1004
IMPORTANT WARNINGS and CAUTIONS!
WARNING | A WARNING alerts you to the possibility of serious injury or death if you do not follow |
| the instructions. |
CAUTION | A CAUTION alerts you to the possibility of damage or destruction of equipment if you do not |
| follow the corresponding instructions. |
WARNING | Improper installation can result in serious personal injury! Make sure that the |
| mounting surface can support a redundant weight factor five times the total weight of |
| the equipment: if not, reinforce the mounting surface structural members before |
| installing the |
WARNING
WARNING
Be aware of the potential for personal injury or damage to the unit if it is not adequately mounted.
The installer is responsible for verifying that the mounting surface to which the
WARNING | The combined weight of the display placed on the | |
|
| lbs. (11.3kg), the maximum load capacity of the mount. |
WARNING | Watch for pinch points. Do not put your fingers between movable parts. | |
WARNING | Make sure the mount is correctly oriented. | |
WARNING | When using an OFB and adding an additional arm to an existing mount, the total | |
|
| number of arms on the mount cannot exceed two arms. |
CAUTION Check the unit for shipping damage before you begin the installation.
CAUTION
CONTENTS |
| TOOLS REQUIRED FOR | |
PARTS | 3 | INSTALLATION | |
| |||
PARTS LIST | 3 | 5/32” Hex key wrench (provided) | |
INSTALLATION | 4 | ||
| |||
Removing the Display from the Mount | 4 | 3/16” Hex Key wrench (provided) | |
Installing the Lift Arm | 5 | ||
Installing base end of lift arm | 5 | NOTE: Other tools may be required depending on the | |
Installing display end of lift arm | 5 | ||
Adjusting Lateral Movement | 6 | method of installation. | |
Adjusting Lift Arm Tension | 6 |
| |
Cable Management | Error! Bookmark not defined. |
2